Puesto Actual: Home > Productos > Driver

Driver

Características principales

Control the brightness from the front panel directly

Do cascade up to 4 pieces and control by one USB

 for Linsn sending card

Lock safe with Ethercon connection;

Input DVI and HDMI at the same time, and HDMI

input has thefirst priority

Lock safe for power with Powercon connector and

 can loop through directly

 

share:

Driver controller is the only piece of equipment between the video source and LED screen. The device takes a digital video (DVI) input and converts it so it can be sent over a single CAT-5 (RJ45) cable to the tiles. Compare with normal RJ45 connector, Driver use Ethercon soft-patched connectors to make sure lock connection and better protection for the CAT5 cable. If using good quality cable, distances up to 100 meters (300 feet) are easily achievable without the need for any signal booster. A single Driver can drive up to 1280*1024 (2048*640) resolution (up to 142 pcs P6 tiles). Driver is ready for cascade up to two pcs controller with push button settings, and support much higher resolution application. The mapping of each tile is also programmed with this controller, using a user friendly PC application.

 

Input

1 x DVI

1 x HDMI

Output

2 Gigabit copper port output, and

1 for back up output

Net Size

480mmx248.8mmx45mm

Package size

535mmx355mmx130mm

Net weight

2.3kg

Package weight

4.0kg

Work Temperature

0°C~40°C

Relative Humidity

10%~85%

Tel: +86 0592-5771197 FAX: +86 0592-5788216 buzón: [email protected] dirección: S601-S607 Weiye Touch Building, Xiamen Hi-Technology Zone, China
Productos Destacados: las señales de vídeo video switcher seamless switcher video processor AV processor Video processo Accesories video wall contr digital signage video scaler

Copyright © 2017 RGBlink - ICP 09046269