Location: Home > Products > Driver

Driver

Key Features

 

Control the brightness from the front panel directly

 

Do cascade up to 4 pieces and control by one USB

  for Linsn sending card

Lock safe with Ethercon connection;

 

Input DVI and HDMI at the same time, and HDMI

  input has thefirst priority

 

Lock safe for power with Powercon connector and

  can loop through directly

 

share:

Driver controller is the only piece of equipment between the video source and LED screen. The device takes a digital video (DVI) input and converts it so it can be sent over a single CAT-5 (RJ45) cable to the tiles. Compare with normal RJ45 connector, Driver use Ethercon soft-patched connectors to make sure lock connection and better protection for the CAT5 cable. If using good quality cable, distances up to 100 meters (300 feet) are easily achievable without the need for any signal booster. A single Driver can drive up to 1280*1024 (2048*640) resolution (up to 142 pcs P6 tiles). Driver is ready for cascade up to two pcs controller with push button settings, and support much higher resolution application. The mapping of each tile is also programmed with this controller, using a user friendly PC application.

 

Input

1 x DVI

1 x HDMI

Output

2 Gigabit copper port output, and

1 for back up output

Net Size

480mmx248.8mmx45mm

Package size

535mmx355mmx130mm

Net weight

2.3kg

Package weight

4.0kg

Work Temperature

0°C~40°C

Relative Humidity

10%~85%

Copyright © 2017 RGBlink - ICP 09046269